Apertura vol. 18, núm. 1, abril - septiembre de 2026, es una revista científica especializada en innovación educativa en ambientes virtuales que se publica de manera semestral por la Universidad de Guadalajara, a través de la Coordinación de Recursos Informativos del Sistema de Universidad Virtual. Oficinas en Av. La Paz 2453, colonia Arcos Sur, CP 44140, Guadalajara, Jalisco, México. Tel.: 3268-8888, ext. 18775, www.udgvirtual.udg.mx/apertura, apertura@udgvirtual.udg.mx. Editor responsable: Dr. Rafael Morales Gamboa. Número de la Reserva de Derechos al Uso Exclusivo del Título de la versión electrónica: 04-2009-080712102200-203, e-ISSN: 2007-1094; número de la Reserva de Derechos al Uso Exclusivo del Título de la versión impresa: 04-2009-121512273300-102, ISSN: 1665-6180, otorgados por el Instituto Nacional del Derecho de Autor. Número de Licitud de Título: 13449 y número de Licitud de contenido: 11022 de la versión impresa, ambos otorgados por la Comisión Calificadora de Publicaciones y Revistas Ilustradas de la Secretaría de Gobernación. Responsable de la última actualización de este número: Sergio Alberto Mendoza Hernández. Fecha de última actualización: 27 de marzo de 2026.
Inicio >
Interpretación de la virtualidad. El conocimiento mediado por espacios de interacción social >
Comentarios del lector/a >
My Shed Plans Review
















My Shed Plans Review
por Ellen Thomas (2019-05-29)
The woodworking craft is a profession for My Shed Plans most folks and a hobby for others. The great thing about it is you can make a living with it, you can earn good money on the side with it, or you can save a lot of money by using it to make high quality furniture for your home or for gifts.With good woodworking plans and a little bit of skill you can put some quality furniture together and sell it. The great thing about that is the furniture won't even have to be very complicated pieces if you are using real wood since most furniture stores are selling furniture made with very cheap material.Whether you use the craft as a profession or just as a hobby though, the very first step for every woodworking project from putting together a simple bench or table to building a million dollar home is to acquire a great set of woodworking plans. No professional woodworking craftsman would ever think of starting any woodworking project without a set of plans.If a pro were going to build something simple he would just draw a set of plans that included all the dimensions of the project. But then, something that may seem very complicated to a beginner would be simple for a pro. Then a list of the materials needed for the project would be made from the drawing.The accuracy of the plans is very important too because wood comes in different lengths and the only way you can be certain of having everything you need before you start is by knowing the exact dimensions of the material to be used. Also, if you needed four pieces of a certain board just less than three feet long you can buy a twelve foot piece or two six footers instead of a fourteen footer or a couple of ten footers. You could waste a lot of money buying the wrong length boards since it's usually sold by the foot. https://dietsheriff.com/my-shed-plans-review//